New NEJE Master 2S 30W Powerful Laser Engraving Machine

$417.98 $347.98
$347.98

Description:

  1. Newly added 2S 32-bit chip, smarter and more efficient processing effect.
  2. Two-in-one zoom laser module, adjustable lens and fixed focal length in one module, 7.5W optical power output, suitable for engraving and cutting.
  3. Wireless APP operation, more convenient, DIY work anytime, anywhere.
  4. Engraving area of 170*170mm, no volume or weight limit for engraving.
  5. Built-in safety protection device, more assured and safe operation.
  6. It can support a variety of modules: 3500mw/7W/20W/30W/40W.

 

Feature:

  1. NEJE brand new master 2s series motherboard’s hardware performance; 2s series motherboard will update the GRBL 1.1f of ATMELs chip to brand new GD32 MCU. Which has improved 50% performance compare with STM32 chip.
  2. It supports more than 10 different function modules, the NEJE module has excellent optical design and reliable work performance, which is the best and the most guaranteed service currently. Each NEJE module has an intelligent control function, which is quieter to use, and has a heat management function to ensure that each module runs at a safe temperature and obtains a longer service life. NEJE series module provides 2 years free warranty.
  3. Specializing Motherboard with GD32 MCU.
  4. It could preprocess 32 instructions, support baud rate as high as 2,000,000, compared to STM32 desktop laser engravers, which only has 921,600, more powerful!
  5. Engraving speed could be as high as 42,000 millimeters/Min. ( If do not consider the laser carving result, thespeed of movement could be as high as 1200millimeters/Sec. ); compared to stm32 desktop laser engravers, which only has 3000 millimeters/Min, more powerful!
  6. The Most Advanced 32Bits Laser Engraver Firmware, smarter, faster, higher precision and easier to use. NEJE also provides firmware upgrade services
  7. Laser power range could be S0 - S1000, NEJE Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper, to match with NEJE series module can achieve the more accurate effect.
  8. Active Position Protection,There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.
  9. Exposure Duration Detection and Limitation,If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
  10. NEJE software ( free software ) supports windows 7, 8, 10. Macs OS. NEJE APP including android, iOS macsOS, NEJE team develops it which is for beginner, it can provide high precision carving and CNC creation’s software, the operating procedures are automatic and simple, safe use. Especially the current engraving software, NEJE team keeps upgrade and optimization, also provides free upgrade services, you can get free upgrade services in wiki.nejetool.com
  11. Benbox free software, supports Windows XP, 7, 8, 10.
  12. Laser GRBL ( free software ) supports Windows XP, 7, 8, 10. Laser GRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the engraver via laser Laser GRBL for engraving and cutting.
  13. LightBurn ( paid software, light burn software.com ) supports Windows, Macs OS, and Linux. It's the most popular paid carving software in the world, very easy to use.
  14. NEJE module supports PWM control and temperature sensing, the module can adjust the focus by up and down, it also supports zoom module’s and focuses module’s installing.
  15. Pre-assembled parts, it just has to install 4 screws, need 1 minute to install the machine.
  16. 170 x 170 mm large engraving area. The widest space is less than 600 millimeters, it just able to place a whole home-used table.
  17. Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance, NEJE structure is different from other acrylic main structure, NEJE machine is using high-strength composite mostly. It also uses CNC art craft, to make sure pulley and aluminum material without any gap. Besides, it won’t deformation for a long time, which means it is robust and reliable.

 

Specification

Model

NEJE Master 2S 30W

Optical Power

450nm 7.5W

Control Board

2S 32-Bit MCU + Wireless control + MEMS

Satety Protection

MEMS

Working Size

170 x 170 mm

Pixel

2266 x 2266 px

Dot pitch

0.075mm

Software

NEJE APP for Android, NEJE Wireless APP for iOS / macsOS, NEJE software for windows, Benbox, LaserGRBL with firmware GRBL1.1f.

NEJE Software Upgrading Service

YES

NEJE Cloud Gallery

YES

NEJE Scanner function

YES

Frame material

CNC Cutting Composite plate, aluminum alloy, acrylic.

Can Engrave

MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum

Can Not Engrave

Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material

Continue working

Unlimited

Wavelength

450nm

Beam Shape

Dot (Focusable)

Drive

Built-in

Lens Material

D-ZK3

Heatsink Material

Aircraft Aluminum + Brass Shell

Luminous Color

Blue

Input Voltage

AC100-240V, 50/60Hz

Output Voltage

DC12V, 3A

 

Note :

  1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!
  2. Do not engrave mirror objects,Pay attention to fire,Pay attention to pets when working!
  3. Smoke will be generated when burned, please pay attention to smoke exhaust indoors.
  4. The warranty period of laser module is one year. If you have any quality problem(Except individual situation like using the laser module more than 30 minutes per time and casue the damage ), please feel free to ask our customer service for a help.
  5. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.
  6.  If you have any quality problem about the machine, please feel free to contact us. Many operative problem can be solved according to your video and problem description. Thank you in advance.

 

Package Included:

1 x

Master 2S Laser Engraving Machine

1 x

Laser Module

4 x

Nuts

1 x

Red Goggle

1 x

L-shaped wrench

1 x

USB Cable

1 x

Small wrench

1 x

12V3A Power Adapter

1 x

Eu adapter

1 x

Small Wooden block

5 x

Test Paper

1 x

User's Manual

 

More Details:

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
New NEJE Master 2S 30W Powerful Laser Engraving Machine
You have successfully subscribed!
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top