1. Rootstock and scion it is easy to match the U-cut, V-cut or Ω-cut, rapid healing.
2. Using easily and fast. Grafting method than traditional savings.
3. Blade can be replaced
4. Use the pruner to cut useless branches from the plant.
Materials: carbon steel, ABS and Aluminum
Cut grafting stocks diameter from 5mm-12mm
Trimming blades thickness: 3mm/0.12inch
Grafting Tape Width: 2cm/0.79Inch
How to use:
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut the stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant is not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
1 x Farming Pruning Shears Scissor
1 x U-cut blade
1 x V-cut blade
1 x Ω-cut blade
1 x Spare blade holder