SHINE SING 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing

$45.99
Color *
White
Pink
Skin
Black
Transparent Red
Yellow
Gray
Blue
Green
Clear
Transparent Green
Purple
Bright red
Capacity *
$45.99

Specification

Capacity: 500g 1000g
Gross weight: 0.69kg 1.2kg
Single product packaging size: 23*10.5*11cm 26*10.5*11cm
Packing method Bubble column + airplane box Bubble column

Resin Technical Parameters:
Solidify Wavelength: 405nm
Bending Modulus: 1.882-2.385 Gpa
Bending Strength: 59-70 MPa
Hot Deformation Temperature: 80 ℃(176°F)
Volume Shrinkage: 3.72-4.24%
Tensile Strength: 36-52 MPa
Tensile Modulus: 1.779-2.385 GPa
Elongation at Break: 11% -20%
Shore Hardness: 84D
Glass Transition Temperature: 100 ℃(212°F)
Density: 1.05-1.25 g/cm3
Notched Izod Impact Strength:44-49 j/m
Shelf Life: 1 year

Descriptions

【Low-odor Resin】SHINE SING ultra-low-odor resin is made of plant materials, which is nearly odorless, and will not have a pungent odor when the bottle is opened, and does not affect the indoor air.
[High Precision Details and Toughness] The 3D printed objects came out pretty hard with high accuracy and good detail. without excessive shrinkage. The printed artwork is stored for a long time without deformation.
[Wide Compatibility] Compatible for most wavelength 405nm LCD/DLP resin 3D printers, apply for dental design, Garage Kits etc.
[Bright and Available Colors] SHINE SING 3D printer rapid resin is manufactured with high-quality pigments and photoinitiators, make the printed models show bright and stunning color effect.
[Safe and Reliable] The resin passed MSDS certification. Leak-proof bottle and completely wrapped in a bubble bag, make the photopolymer resin intact during transportation.

Printing Setting

Bottom exposure time(s): 30-60 s/layer
Normal exposure time: 6-10 s/layer

Precautions

-Shake the bottle before pouring the resin into the tank.
-Wear gloves and masks before using to avoid direct skin contact.
-Avoid printing too many items at the same time. Divide your production into several stages to achieve better results.
-Clean finished models with IPA or Ethanol. Dip in alcohol bath and/or clean with soft brush remaining resin on the model.
-Recommended storage temperature 20°C - 30°C.
-To preserve the resin's characteristics, filter the liquid after each printing process and protect the containers from direct sunlight.

 

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top