Glass Printer Bed 235x235x3.8mm


Add to Wishlist

american expressdiners clubdiscovermasterpaypalvisa
Glass Print bed Advantages:
Glass Print bed is a universal print surface for 3D Printing. Almost all types of filament will print toglass in one way or another. Just place the Glass Print bed on your print board and clip it in place!To print with PLA or ABS , lightly spray the surface of the glass with 3d printing special solid glue,then install the Glass Print bed with glass clip. This glass has been specially ordered and modified for use in 3D Printers.

If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.

1.Resistant to thermal shock compared to regular glass.
2.Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
3.Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.

1.The glass can be used normally at 520 degree temperature.
2.You need to adjust the Z axis limit switch up and down when installing.
3.Apply some 3d printing solid glue on the glass surface on before printing.
4. The Glass Print Bed's thickness of 4.0mm is within the normal range.