Ortur Laser Master 2 Pro S2 SF Laser Engraver CNC 10000mm/32-Bit Motherboard Laser GRBL(LightBurn), 400x400mm+24V Circuit/1.8 Series Firmware +Free Gift

$529.00 $449.00
Laser Module *
Ships From *
$449.00


Specification

  • [Free Gift] 2 colored paper + 10 business cards + 2 bone-shaped dog tags + 2 fish-shaped cat tags
  • [Ortur Laser Master 2 pro S2 model] Laser Master 2 Pro S2, adding new functions such as flame detection, emergency stop, etc., with stronger system reliability, smooth engraving, faster engraving speed, higher accuracy, and more refined engraving products. brings users a better experience!
  • [Overall optimization] Laser Master 2 Pro S2 has a longer service life, because the mechanical structure has been optimized and designed to have a faster speed and can work stably for a long time. At the same time, Ortur Laser Master 2 Pro can provide users with more security because it has more security features.
  • [Accessories system update] 1. Because it is equipped with the latest OLM-PRO S2 -V10 motherboard, the engraving is smoother and more delicate, the engraving accuracy is higher, and the speed is faster. 2. The circuit system with 24V voltage is upgraded, the current is lower, and the system is safer. 3. Update Ortur Laser 1.5 firmware, which is the most advanced laser engraving machine firmware at present, with more powerful functions. 4. Support Ortur offline control screen.
  • [Product advantage] Ortur Laser 1.8 firmware, qualified for ESP32 MCU, optimizes the motion algorithm, and increases the maximum stepper motors speed from 4000mm/min to 10000mm/mm. The focus of the LU2-4 (20w) laser module is smaller because of it. It is the second-generation FAC laser module, the focal point is only 0.08*0.15mm, and the focal area is about a quarter of the first-generation 0.23*0.23mm. So he can cut through 3mm plywood and 6mm pine board at a time.
  • [Safety protection] 1. When the engraving machine is displaced or tilted, it will automatically stop the laser to prevent damage to the target from the laser; 2. When the engraving machine or computer crashes, the laser will stop working immediately to prevent continuous fire. 3. The engraving machine is turned on, but there is no movement for a long time, it will be protected, and the laser will be turned off automatically. 4. Flame Detector + Buzzer Alarm 5. Emergency stop switch for emergency

Main Features:

  • Specialized Motherboard with 32Bits MCU It could preprocess 32 instructions, support baud rate as high as 921600, more powerful!
  • The Most Advanced 32Bits Laser Engraver Firmware Ortur laser master firmware, smarter, faster, higher precision and easier to use.
  • Laser power range could be S0 - S1000, compared to 8bits desktop laser engravers, which only has S0 - S255, Ortur Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8bits high power laser engravers could not do.
  • Engraving speed could be as high as 3000MM/Min. ( If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S )
  • Active Position Protection There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.
  • Laser Beam Safety Guard If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire.
  • Exposure Duration Detection and Limitation If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
  • LaserGRBL ( free software ) supports Windows XP, 7, 8, 10. LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the engraver via laser LaserGRBL for engraving and cutting.
  • LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use.
  • This laser engraver supports PWM mode.
  • Pre-assembled parts, just need 10 - 20 minutes to install the machine.
  • 400 x 400 mm large engraving area.
  • Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance
  • Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

 

  • Laser Master 2 Pro S2 SF Laser Master 2
    Motherboard OLM-MAXUP-V10 Motherboard,
    with 32Bits MCU
    OLM-MAX-V10 Motherboard,
    with 32Bits MCU
    Firmware OLF-V1.8 Firmware V1.40 Series Firmware
    Safety Precautions
    1. Active Position Protection
    2. Exposure Duration Detection and Limitation
    3. Laser Beam Safety Guard
    4. Flame Detector
    5. Emergency Stop Button
    1. Active Position Protection
    2. Exposure Duration Detection and Limitation
    3. Laser Beam Safety Guard
    Add-ons
    1. Ortur Control Box (Offline Controller)
    2. Adjustable Z-axis Lifting Device
    N/A
    Frame Materials Aluminum + Powder Coated Steel Aluminum + Arylic
    Motors NEMA 17 Stepper Motors NEMA 17 Stepper Motors
    Mechanical Precision Y:12.5um,X:12.5um Y:12.5um,X:12.5um
    Pixel Accuracy Adjustable
    (Default: 300 pixels per inch, about 0.81um Pixel Accuracy)
    Adjustable
    (Default: 300 pixels per inch, about 0.81um Pixel Accuracy)
    Engraving Area
    400mm*400mm
    400mm*430mm
    Available Laser Modules
    LU2-4 
     (2nd Generation FAC , Luminous Power: 4,500-5,000mw)
    LU1-2 
    Luminous Power:  1,200-1,600mw)
    LU1-3 
    Luminous Power: 4,000-4,500mw)
    LU1-4 
    Luminous Power: 4,500-5,500mw)
    Wave Length 445±5nm 445±5nm
    Focus Fixed Focus Fixed Focus
    Default Focal Length 30mm
    (from the heat sink to the object)
    29mm
    (from the heat sink to the object)
    Control Mode PWM PWM
    Power Rate S0-S1,000 S0-S1,000
    Engraving Speed 0-10,000MM/Min 0-3,000MM/Min
    Baud Rate 115200 - 921600 (Default: 115200) 115200 - 921600 (Default: 115200)
    Computer OS
    Win XP, Win 7, Win 8, Win 10 (LaserGRBL)
    Mac and Linux (LightBurn)
    Win XP, Win 7, Win 8, Win 10 (LaserGRBL)
    Mac and Linux (LightBurn)
    Control Softwares LaserGRBL (free), LightBurn (Paid Software) LaserGRBL (free), LightBurn (Paid Software)
    Input Format JPG, JPEG, PNG, BMP, SVG, etc. JPG, JPEG, PNG, BMP, SVG, etc.
    Available Materials of Engraving
    Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc. Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc.
    Available Materials of Cutting
    Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc. Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc.
    Input Voltage 110V-220V (Compatible) 110V-220V (Compatible)
    Power Adapter Output 24V/2A 12V/3A
    Operating Temp. -20℃-50℃ -20℃-50℃

Support

User Manual:https://ortur.tech/documentation/olm2pro/OLM2_Pro_User_Manual_EN.pdf

Software

List of compatible software with Ortur Laser Master 2 Pro:
LaserGRBL(Free)(Windows): Download Page
LightBurn(Paid - 30 Day Free Trial)(Windows/Mac OS/Linux): Download Page
Ortur laser engraver
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top